Flowtera Pipe
1 / 5
Product: A333 alloy steel pipe Gr.6 for low temperature service
| CHEMICAL COMPOSITION (CAST ANALYSIS) IN % | ||||||
| Steel grade | Delivery condition | C Max | Si Min | Mn | P max | S max |
| GRADE 6 | Heat-treatment | 0.30 | 0.10 | 0.29-1.06 | 0.025 | 0.025 |
| MECHANICAL PROPERTIES | ||||||
| Steel grade | Yield strength Min (Mpa) | Tensile strength Min (Mpa) | Elongation A Min (%) | Impact test (J) | ||
| GRADE 6 | 240 | 415 | AS PER ASME SA333/ASTM A333 | AS PER ASME SA333/ASTM A333 | ||
Our quality control department consists of experienced technicians. These personnel strictly control the whole production procedure, from introduction of raw materials to finish products. They ensure high quality products for our customers.
A1: These pipes are specifically designed for low-temperature service, making them ideal for pipeline transport in cold climates or cryogenic applications.
A2: Yes, a full MTC is supplied along with every pipe order to ensure compliance and traceability.
A3: Absolutely. We welcome and accept inspections from any authorized third-party agency to verify quality before shipment.
A4: We offer various options including hot/cold galvanizing, black painting, varnish, anti-rust oil, and 3PE coating.
A5: We provide sizes ranging from 1/2" up to 32" in diameter with various wall thicknesses such as SCH40 and SCH160.
A6: Pipes can be delivered in Hot-finished or Heat-treatment conditions depending on the specific project requirements.
